> FLASH THE PLANET_

Pick your hardware. Load your firmware.

chip ESP32-S3 xfer WebSerial access gated
01 / DEVICE

Loading verified catalog…

  1. Use desktop Chrome or Edge over HTTPS. Connect a USB data cable and close any serial monitors.
  2. Choose your physical board and edition. The ESP32-S3 chip alone does not identify the board model.
  3. Click FLASH, select the USB port, then Install. Do not disconnect until installation finishes.
  4. No port listed? Hold BOOT / G0, press RST, release BOOT and retry.

Clean installation at offset 0. Only use images made for your board. Authorized lab use only.